Comments?





Organic Chemistry Molecular Model Sets, Permanent Neodymium Rare Earth Magnets, Magnifying Glasses, Test Strips, Lab Supplies, Tuning Forks

Lab Support Stands and Clamps

Support stands have 2 tapped holes to choose from to support any experimental setup. The rod extends 500mm (~20"). (The larger stand is not shown at present).

  • The clamps on the left can be used to support test tubes & boiling & Erlenmeyer flasks.

  • The support rings hold separatory funnels or with wire gauze to support beakers & flasks.

  • The large clamp can fit on the neck of 500ml+ separatory funnels.

  • The #33758 single piece vinyl coated clamp is best used with test tubes & small flasks. It is not recommended for burets and will obstruct some of the markings. It opens to a maximum of 50mm (~2").

  • The #33753 4 finger clamp & #33752 bosshead (clampholder) can also be used with flasks, separatory funnels or a 100ml (cc) buret. The clamp opens to a maximum of 75mm (~3").
 support stand, retort stand, support ring, bosshead, flask clamp
P/NDescription QtyUnit
33760-500Support stand 140x200mm (5x8"), 2 x 250mm rods1-914.85
 10+14.65
33762-750Support stand 180x300mm (7x12") w/ 3 x 250mm rods1-927.95
 10+27.50
33759Support rod, 250mm (10"), extends rod for bases 33760/337621-92.95
 10-992.90
 100+2.85
33751Clamp holder "silver", heavy use w/ rings & clamps.1-96.25
 10-996.15
 100+6.10
33753Flask clamp, 4 finger, opens 90mm, needs clampholder 337511-910.75
 10-9910.55
 100+10.45
33758Flask clamp w/ vinyl coated jaws, 45mm opening1-98.95
 10-998.70
 100+8.60

            Organic Chemistry Molecular Model Sets, Permanent Neodymium Rare Earth Magnets, Magnifying Glasses, Test Strips, Lab Supplies, Tuning Forks

© Copyright 1997-2012, Indigo® Instruments. All Rights Reserved.